|The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu.|
The Titan WatchmanSonic is an electronic oil tank gauge that continuously monitors the heating oil levels within the tank and transmits the data to a receiver plugged into an electrical socket in the home or office. The WatchmanSonic is a wireless replacement/alternative for a dip stick or sight level gauge. The WatchmanSonic oil level sensor prevents the user from running out of fuel by continuously monitoring the heating oil levels and alerting the user when the tank requires refilling.
The WatchmanSonic consists of a green transmitter that is fitted to the top of the tank and monitors the heating oil levels and transmits this to a receiver plugged in the home or office. When the heating oil levels drop below 10% the fuel dispensing pump symbol is displayed on the receiver as a reminder to the user that more oil needs to be ordered and ensuring that the user does not run out.
Key Features and Benefits:
Speedfit 15mm Pipe Insert
The Salamander SESI Scale Inhibitor is an electrolytic water conditioner that will protect central heating systems from the formation of scale and rust deposits. The formation of scale and rust is common place in central heating systems especially in hard water areas and can cause blockages in pipes, radiator and boiler heat exchanger which can be costly to remedy. Also blockages can significantly reduce the energy efficiency of the boiler and central heating system causing the boiler to work harder resulting in increased fuel consumption. An increase in fuel consumption is bad news for households as fuel bills increase along with higher carbon emissions.
The Salamander SESI Scale Inhibitor uses an internal zinc electrode to manipulate the hard salts that form scale deposits to bond together rather than forming deposits within the system. Also the SESI Scale Inhibitor will not affect the flow rate or pressure within the system and does not require an electrical power supply to work making it quick and simple to install.
At Boilers2go we recommend the Salamander SESI 15mm Scale Inhibitor for use with central heating systems that use 15mm pipe to fully protect domestic boilers and heating systems against the formation of scale and rust deposits. Also with the SESI 15mm Scale Inhibitor you can ensure that the high energy efficiency, low fuel bills and low carbon emissions are maintained for the life of the boiler and system.