|The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu.|
The Grant Vortex Eco Internal Utility Oil Regular Boiler range are floor standing and ideal for siting in utility rooms of small to large properties with more than one bathroom and a high demand for hot water. The Vortex Eco Utility Oil Regular Boilers are fitted with the latest in Riello burner technology providing high efficiency combustion helping to reduce fuel consumption while maintaining optimum efficiency. Also the Vortex Eco Utility Oil Regular boilers feature a simple casing, controls and pipe work arrangement making them ideal for utility rooms as well as making them quicker and easier to install and use. Front access also allows for easier and quick servicing of the burners and combustion chamber. The Vortex Eco Utility Oil Regular Boilers also feature left, right, top and back flueing providing greater flexibility when deciding where in the home to install the boiler and helping to free up valuable living space.
At Boilers2go we recommend the Grant Vortex Eco 15/21 Internal Utility Oil Regular Boiler for small to medium size properties in rural areas without a mains gas supply and with a high demand for hot water. Also the Vortex Eco 15/21 Internal Utility Oil Regular Boiler is a condensing boiler able to reclaim latent heat from the flue gases and use it to reduce fuel consumption resulting in lower fuel bills and carbon emissions. Plus the Vortex Eco 15/21 Internal Utility Oil Regular Boiler comes with a 2 year manufacturer's warranty for peace of mind.
Speedfit Pipe Cutter 10mm-22mm
In a closed central heating system water cannot be compressed so any increase in the volume, created by an increase in temperature, needs to be accomodated. This is done with the use of an expansion vessel, when the water in the system is cold the pre-charge pressure of the system forces a diaphram in the expansion vessel against the tank towards the inlet. As the temperature increases the expanding water volume pushes against the diaphragm creating additional volume for the water to enter the expansion vessel. As the temperature decreases the pre-charge pressure forces the water from the expansion vessel back into the central heating system. This maintains a constant pressure within the central heating system and helps to reduce energy and water consumption.