The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu.        

Polytank 20 Gallon Water Storage Tank (20"x20"x20")



Quantity

Product Description

The Polytank 20 Gallon (91 Litre) Cold Water Storage Tank (20"x20"x20") comes with the following fits kit:

  • Snap on Polylid
  • POLYTANK Byelaw 30 kit and fitting instructions
  • 1/2" BS1212 Part 2 ball valve and 4 1/2" float
  • Ball valve back plate
  • 22mm compression tank connector
  • 15mm x 1/2" angled service valve
  • Insulation and ties

Polytank Installation Guide

Customers Also Bought

Customers Also Bought

  • Sentinel X400 gel sludge remover

    Sentinel X400 System Restorer Gel is formulated for cleaning existing central heating systems with a significant amount of corrosion debris affecting the efficiency of the central heating system and boiler. X400 System Restorer Gel is ideal where a new boiler or pump is to be fitted to an existing central heating system or where radiators have developed cold spots due to the build-up of sludge, a black iron oxide deposit commonly found in untreated central heating systems.

    One cartridge of Sentinel X400 System Restorer Gel is sufficient to treat a system with 8 to 10 radiators; larger system will require a second cartridge to sufficiently restore the system to optimum performance. Once the system has been dosed the X400 System Restorer should be circulated around the system at normal operating temperature with all the valves fully open and the pump turned to full flow for at least 2 hours or until the system is restored to optimum performance. For badly affected system the circulating time should be extended, e.g. up to 4 weeks; however X400 System Restorer Gel will not be able to clear completely blocked pipes. There are no limits to the number of times a system can be treated with X400 System Restorer Gel but it is recommended that for best results that it is used in conjunction with a power-flushing device. The X400 System Restorer Gel is simple to use and is simply added to the system via a radiator air bleed valve or the filling loop with an adaptor and caulk gun. 

    Key Features and Benefits:

    • Removes radiator sludge effectively
    • Restores system circulation
    • Restores system performance
    • Suitable for all metal types including aluminium
    • Neutral pH
    • Simple and rapid application

     

    Sentinel X400 Gel System Restorer Video

     

    608163
    £16.64
  • Vaillant ecoTEC Plus 624 HE Gas System Boiler

      

    The Vaillant ecoTEC Plus System range of system boilers are an ideal choice for a wide range of house with outputs that range from 12 - 37kw. ecoTEC plus system boilers provide simple installation and unrivalled flexibility.

    Vaillant ecoTEC plus system boilers have compact dimensions and one of the lowest weights in their class (from 34.8kg) - meeting the growing demand from installers and end users for smaller, lightweight appliances. The boilers are all SEDBUK Band 'A' rated (SAP 2009) and all models can easily be converted to run on LPG.
    The CH (Central heating) heat output range from 4.9 - 12kW in the ecoTEC plus system 612 to 12.0 - 37.0kW for the ecoTEC plus system 637. All ecoTEC plus system boilers have a 2 year guarantee.
    ecoTEC plus system boilers have the following central heating heat output ranges:
    ecoTEC plus 612 - 4.9 - 12.0kW
    ecoTEC plus 615 - 4.9 - 15.0kW
    ecoTEC plus 618 - 6.7 - 18.0kW
    ecoTEC plus 624 - 8.7 - 24.0kW
    ecoTEC plus 630 - 10.0 - 30.0kW
    ecoTEC plus 637 - 12.0 - 37.0kW

    Brochures & Manuals

    ecoTEC Comparision Guide

    ecoTEC 2012 Brochure

    ecoTEC Plus Installation Guide

    ecoTEC Plus User Manual

    Features & Benefits

    High condensing efficiency SEDBUK efficiency of 89.4% (SAP 2009)
    Compact dimensions Offers excellent siting versatility and easy installation
    Large surface area stainless steel heat exchanger Stainless steel heat exchanger allows more heat to be extracted by recapturing otherwise wasted heat
    Built-in status / diagnostic display Provides comprehensive status and diagnostic information and simple push button programming
    Single electronic circuit board Simplifies commissioning and servicing
    Simple new control panel Straightforward push button controls, provide improvements via: - intuitive heating and hot water adjustment by ‘hot keys’ similar to those used on mobile phones - fault codes, which are supplemented by plain text descriptions
    'Wizard' installation feature To guide the installer through the correct set up and commissioning of the boiler on first ignition, saves time and ensures ‘right first time’ installation
    Front access to components As with previous models, but we now also have new removable side panels for additional accessibility and flexibility
    Exceptional build quality Tried and tested manufacturing methods and retained compact dimensions, as well as low lift weight, means reassured continuity with the previous ecoTEC range

    At Boilers2go we recommend the Vaillant ecoTEC Plus Gas System Boiler for small homes with a single bathroom where living space is limited and where the user wants the convenience of instant hot water. Also as the ecoTEC Pro Gas Combi Boiler is a condensing boiler, capable reclaiming latent heat from the flue gases, the user will benefit from reduced fuel bills and carbon emissions. This also gives the ecoTEC Pro Combi Boiler an energy efficiency rating of 'A' on the SEDBUK scale. Also Vaillant provide a 1 year manufacturer's guarantee a worthwhile extra in providing peace of mind to consumers who opt for the ecoTEC Pro Gas Combi Boiler.

    Vaillant ecoTec Pro Dimensions (mm)

    Key
    1 Wall breakthrough for air/flue gas duct
    2 Hanging bracket
    3 Heating flow (22 x 1.5)
    4 Hot water connection (15 x 1.5)
    5 Gas connection (15 x 1.5)
    6 Cold water connection (15 x 1.5)
    7 Heating return (22 x 1.5)
    8 Air/flue gas duct connection
    9 Condensate siphon
    10 Condensate discharge connection, Ø 19 mm
    11 Heating expansion relief valve drain line connection, Ø 15 mm

     

    127224
    £858.30

Customer Reviews

 

Ask A Question

 

Price Match

 

Price Match

Seen our product priced lower elsewhere?

Name: *
Email: *
Telephone:  
Competitors Link: *
Competitors Price: * £ (inclusive of tax & shipping)
Comments:  
Code:  
Enter Code: *